How to Paint 3D Prints: A Step-by-Step Guide for Beginners
A painted print looks completely different from a raw one. Layer lines disappear, details pop and a cheap gray figure becomes a showpiece. You do not need expensive tools to get great results. Here is the step-by-step process.
What you need
- Sandpaper in several grits (for example 120, 220, 400 and 800), or sanding sponges
- A hobby knife and flush cutters to remove supports
- Filler primer in a spray can
- Acrylic paints and a few brushes (one fine detail brush is essential)
- Clear varnish or sealer (matte, satin or gloss)
- A dust mask, gloves and a well-ventilated space
Step 1: Clean up the print
Remove supports, brims and blobs with flush cutters and a hobby knife. Cut away from your hand. Small strings can be removed with a quick pass of a heat gun.
Step 2: Sand
Start with a coarse grit (120 to 220) to knock down layer lines and support marks, then move to finer grits. Sanding wet with waterproof paper reduces dust and keeps the plastic cool. Always wear a dust mask when sanding plastic.
Tip: printing at a lower layer height (0.12 to 0.16 mm) saves a lot of sanding on models you plan to paint.
Step 3: Fill gaps and layer lines
Spray two or three light coats of filler primer, letting each dry. Then sand lightly with 400 grit. Repeat until the surface is smooth. For bigger gaps or seams between glued parts, use a little modeling putty, let it cure, then sand.
Step 4: Prime
Apply a final thin coat of primer in the base tone you want: black for dark, moody models, white for bright colors, gray as a neutral choice. Spray from about 20 to 30 cm away in short passes, outdoors or in a ventilated area.
Step 5: Paint
- Base coats: thin your acrylic paint with a drop of water. Two thin coats look better than one thick one.
- Washes: a dark, watery paint that flows into recesses and brings out detail. Perfect for figurines and textures.
- Dry brushing: wipe most paint off a stiff brush and lightly brush raised edges with a lighter color to make details pop.
- Details: eyes, lines and small parts last, with your finest brush.
Step 6: Seal
Protect the paint with a clear coat. Matte varnish looks natural on figures, gloss suits cars and toys. Spray thin coats and let them dry fully.
Alternatives to sanding
- Epoxy coating: a thin layer of two-part epoxy fills layer lines and gives a glossy finish.
- Choose the right filament: matte PLA hides layer lines, and silk PLA looks finished without paint.
- Paint without priming: fine for quick projects, but paint sticks and covers much better on primer.
FAQ
What paint works on PLA?
Acrylic paints work well on PLA, best over a coat of primer.
Do I have to sand before painting?
No, but filler primer and light sanding make layer lines disappear and give a much more professional result.
Can I paint PETG?
Yes, but paint sticks less to PETG. Sand lightly and use a primer made for plastics.
Find a model to paint
Figurines and decor pieces are perfect for painting. Browse our figurines, home decor and all STL files.
