Vase Mode Explained: How to Print Vases Fast with Spiral Mode
Vase mode is one of the most satisfying tricks in 3D printing. Instead of printing layer by layer, the printer draws one continuous spiral from the bottom to the top. The result: a smooth, seamless vase in a fraction of the usual time.
How vase mode works
In normal printing, the nozzle finishes a layer, moves up, and starts the next one, leaving a small mark called a seam. In vase mode, the nozzle rises slowly and continuously while it goes around, so there is no seam at all. The slicer prints:
- a solid bottom (a few layers),
- then a single outer wall spiraling upward,
- with no infill and no top.
How to turn it on
| Slicer | Setting name |
|---|---|
| UltiMaker Cura | Special Modes → Spiralize Outer Contour |
| PrusaSlicer | Print Settings → Layers and perimeters → Spiral vase |
| Bambu Studio / OrcaSlicer | Others → Spiral vase |
Exact menu names can change between versions. Search for “spiral” or “vase” in your slicer’s settings.
Which models work in vase mode?
Vase mode only works for models that can be drawn with one continuous outline per layer:
- One single, solid object (not several parts).
- No internal walls or separate islands on the same layer.
- An open top, or a top you do not mind being left open.
Vases, planters, lampshades, pen cups and decorative containers are perfect. Many vase designs are made as a solid shape on purpose: the slicer hollows them automatically in vase mode.
Tips for strong, clean vases
- Wider lines: one wall is thin. Increase the line width (for example 0.6 to 0.8 mm with a 0.4 mm nozzle) for a much stronger vase.
- Bigger nozzle: a 0.6 or 0.8 mm nozzle gives sturdy walls and prints even faster.
- Solid bottom: use 3 to 5 bottom layers so the base does not crack.
- Silk PLA: the seamless spiral makes silk filament shine.
- Slow down for tall vases so each layer can cool, or print two vases at once in normal mode instead.
Is a vase-mode vase watertight?
Not always. A single wall can have tiny gaps. For fresh flowers, use a glass or plastic insert, or seal the inside with a clear coating. Wider lines and slightly higher temperature also help layers bond better.
Vase mode vs normal printing
| Vase mode | Normal mode | |
|---|---|---|
| Print time | Very fast | Slower |
| Seam | None | Visible line |
| Strength | Lower (one wall) | Higher |
| Models | Single-wall shapes only | Any model |
FAQ
Can I use vase mode for anything other than vases?
Yes: lampshades, planters, cups for pens and brushes, and even decorative ornaments, as long as the shape works with one wall.
Why does my vase have holes or a broken spiral?
Usually the model has internal parts or several islands on some layers, or the walls are too thin for the line width. Check the slicer preview.
Can I add a top in vase mode?
No. Vase mode leaves the top open. Print a separate lid if you need one.
Try it yourself
Browse our home decor STL files for vases, planters and more, or explore all STL files. New to settings? Start with Best PLA print settings.
